Current Position:Home >> Technical Articles

Maintenance of cold storage

Published:2014-01-12 14:28:46 Source:
After cold storage installation or long-term disabled, re-use, cooling rate must be reasonable: Control every day from 8 to 10 degrees is appropriate, should be 0 degrees in a period of time. Cold plate Protection: Note the use of the library should be noted that the body of a hard object collision and scratching. Because depression can cause cold plate and corrosion, can cause serious lower body of a local library insulation properties. Seal protection, due to the cold plate is assembled to fight by the number of pieces of insulation board made​​, so there is a certain gap between the plates, the construction of these gaps will be sealed with a sealant to prevent air and moisture from entering. So in use for some parts of seal failure timely repair. Floor protection, the general assembly of small cold storage installation using insulation board, should be used to prevent the ground there are plenty of cold water and ice, if there is ice, must not use hard objects when cleaning up beat, damage to the ground.
Copyright © Shanghai Wei Hong Refrigeration Equipment Engineering Co., Ltd.All Rights Reserved